EV Charger Installation

EV Charger Installation

Load Management and Supply Upgrades

Smart load balancing, CT clamps and supply upgrades so your charger works within your property's available power.

Free EV Charger Installation quote

No obligation. We only use your details to reply about this job.

Load Management and Supply Upgrades — EV Charger Installation

What's involved

Most homes have a 60, 80 or 100 amp main fuse, and a 7kW charger draws around 32 amps on its own. Add an electric shower, oven and heat pump, and the supply can be stretched. Load management uses a current transformer clamp on the incoming supply to measure total demand and reduce the charger's output when the house is drawing a lot of power, so the main fuse does not blow. On commercial sites, dynamic load management shares power across many chargers. If your main fuse is undersized, or the property still has an old looped supply shared with a neighbour, the installer will advise you to contact your network operator to upgrade the fuse or unloop the supply, which is often free or low cost for domestic customers but can take several weeks. The installer will tell you before the job whether an upgrade is needed, so you can arrange it in advance.

How we handle it

  1. Survey

    Send photos of your consumer unit, main fuse, meter and preferred charger position, or arrange a visit. The installer checks supply capacity, earthing, cable route and whether load management or a supply upgrade is needed.

  2. Quote and charger choice

    You receive a fixed quote covering the charger, installation and any extras such as longer cable runs or groundwork. The installer helps you choose a charger that suits your car, tariff and solar setup.

  3. Installation

    The installer fits the charger, runs a dedicated circuit with suitable protection, installs any CT clamps for load management and connects the unit to Wi-Fi or a mobile network.

  4. Testing and set-up

    The circuit is tested and certified to BS 7671. The installer sets up the app, schedules charging for your tariff and shows you how to use the charger.

  5. Notification and paperwork

    The installer notifies the network operator, registers the work under building regulations where required and gives you the electrical certificate and warranty documents.

Price guide

EV charger installation is usually priced as a fixed package covering the charger and a standard install, with extras for long cable runs, groundwork or supply upgrades. Workplace projects are priced by survey because supply capacity and trenching vary widely. These are typical UK guide prices for 2026. Grants may reduce costs for some customers.

  • Extra cable run or trenching: £25–£80 per metre. Longer routes, ducting under drives or trenching to garages and outbuildings.
  • Standard home 7kW smart charger installed: £900–£1,400. Charger, dedicated circuit up to around 10 to 15 metres, protection, testing and certification.
  • Fault-finding visit: from £90. Diagnosis of charger, circuit and connectivity faults; repairs quoted separately.

Questions about load management and supply upgrades

Will an EV charger overload my electricity supply?

Not if it is installed correctly. Installers check your main fuse and use load management to reduce the charger's output when the house is drawing a lot of power. If the supply is too small, they will advise a fuse upgrade from your network operator.

Get a free ev charger installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote