EV Charger Installation
Home EV Charger Installation
A 7kW smart charger fitted on your driveway or garage wall, with a dedicated circuit, protection, testing and certification.

What's involved
Most home installations use a 7kW single-phase smart charger, which adds roughly 20 to 30 miles of range per hour of charging. The installer surveys your consumer unit, main fuse rating, earthing arrangement and the cable route from the meter to the charger position. A standard install runs a dedicated circuit with suitable cable, clipped neatly along walls or through the garage, up to around 10 to 15 metres. The circuit is protected by an appropriate RCD and overcurrent device, and the charger must provide protection against a broken PEN conductor if the property has a PME earthing system, either built in or through an earth rod. The unit is connected to your Wi-Fi or a mobile signal so you can schedule charging. A typical home install takes three to five hours. Clear the area around the meter and charger position, and confirm where you will park so the cable reaches comfortably.
How we handle it
Survey
Send photos of your consumer unit, main fuse, meter and preferred charger position, or arrange a visit. The installer checks supply capacity, earthing, cable route and whether load management or a supply upgrade is needed.
Quote and charger choice
You receive a fixed quote covering the charger, installation and any extras such as longer cable runs or groundwork. The installer helps you choose a charger that suits your car, tariff and solar setup.
Installation
The installer fits the charger, runs a dedicated circuit with suitable protection, installs any CT clamps for load management and connects the unit to Wi-Fi or a mobile network.
Testing and set-up
The circuit is tested and certified to BS 7671. The installer sets up the app, schedules charging for your tariff and shows you how to use the charger.
Notification and paperwork
The installer notifies the network operator, registers the work under building regulations where required and gives you the electrical certificate and warranty documents.
Price guide
EV charger installation is usually priced as a fixed package covering the charger and a standard install, with extras for long cable runs, groundwork or supply upgrades. Workplace projects are priced by survey because supply capacity and trenching vary widely. These are typical UK guide prices for 2026. Grants may reduce costs for some customers.
- Solar-compatible home charger installed: £1,100–£1,700. Charger with solar diversion mode and CT clamps configured for your system.
- Extra cable run or trenching: £25–£80 per metre. Longer routes, ducting under drives or trenching to garages and outbuildings.
- Standard home 7kW smart charger installed: £900–£1,400. Charger, dedicated circuit up to around 10 to 15 metres, protection, testing and certification.
Questions about home ev charger installation
How much does it cost to install an EV charger at home?
A standard home 7kW smart charger typically costs £900 to £1,400 installed in 2026. That usually includes the charger, a cable run of around 10 to 15 metres, protection, testing and certification. Longer runs, trenching or consumer unit upgrades add to the cost.
How long does EV charger installation take?
A standard home installation takes three to five hours. Longer cable runs, drilling through thick walls or trenching to a garage can extend that to a full day. Workplace projects with multiple chargers and groundwork can take several days or weeks.
Do I need permission to install an EV charger?
Most home installations on a driveway are permitted development and do not need planning permission, although there are limits, such as listed buildings or chargers near a highway. Flat owners and renters need consent from the landlord or freeholder. The network operator must be notified of the installation.
Other services
Workplace and Commercial Charging
Multiple chargers for staff, visitors and customers, with load management, payment options and back-office software.
Charging for Flats and Shared Parking
Charge points for apartment blocks, allocated bays and shared car parks, with metering and access control for each user.
Load Management and Supply Upgrades
Smart load balancing, CT clamps and supply upgrades so your charger works within your property's available power.
Solar and Battery Integrated Charging
Chargers that use surplus solar power and home batteries to charge your car with low-cost, self-generated electricity.
Charger Repairs, Relocation and Upgrades
Fault-finding, replacing old or unsupported chargers, moving units to a new position and upgrading to smart chargers.
Home EV Charger Installation near you
Get a free ev charger installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote