EV Charger Installation

EV Charger Installation glossary

The terms you'll come across, explained in plain English.

CT clamp
A current transformer clipped around the incoming supply cable. It measures household demand so the charger can reduce power and avoid overloading the main fuse.
Earth rod
A metal rod driven into the ground near the charger to provide a local earth connection, used where the charger circuit is arranged as a TT system.
Load management
Automatic control that adjusts charging power according to available supply, letting a charger or group of chargers work within the property's capacity.
Network operator
The company that owns and runs the local electricity network, also called the DNO. It must be notified when chargers are installed and may need to approve larger ones.
Onboard charger
The component inside the car that converts AC power from a home or workplace charger into DC for the battery. It sets the car's maximum AC charging rate.
Open-PEN detection
A protective feature built into many chargers that disconnects the car if it detects a broken combined neutral and earth conductor on a PME supply.
PME earthing
Protective multiple earthing, also called TN-C-S, a common UK supply arrangement. Outdoor EV charging on PME needs extra protection against rare supply faults.
Section 722
The part of BS 7671, the IET Wiring Regulations, that sets requirements for electrical installations supplying electric vehicle charging.
Single-phase supply
The standard electricity supply to most UK homes. It limits home charging to around 7kW.
Solar diversion
A charger mode that uses surplus electricity from solar panels to charge the car, rather than exporting it to the grid.
Tethered charger
A charger with a cable permanently attached, so you simply unhook it and plug into the car. Convenient, but the cable stays outside on the wall.
Three-phase supply
A higher-capacity supply common on commercial buildings and some larger homes. It allows 11kW or 22kW AC charging if the car accepts it.
TT earthing
An earthing arrangement using a local earth electrode, such as an earth rod, rather than the supplier's earth. It is sometimes used for EV charger circuits.
Type 2 connector
The standard plug used for AC charging on most electric cars sold in the UK and Europe. Home and workplace chargers use Type 2 cables or sockets.
Untethered charger
A charger with a Type 2 socket, so you plug in your own cable. It looks tidier and suits households with different cars.

Get a free ev charger installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote